本帖最後由 Dinballian 於 2012-10-22 11:02 編輯
Multi-Terrain Versatility, Velineon Brushless Power, 4WD Performance!
Traxxas 1/10 Rally Racer Brushless RC Car
Traxxas 1/10 Rally Racer Brushless RC Car
Traxxas 1/10 Rally Racer Brushless RC Car
Traxxas 1/10 Rally Racer Brushless RC Car
The Rally scene has been big and Traxxas has reacted, with their new Traxxas Rally Racer a 1/10th scale brushless rally car! The Traxxas Rally Racer will feature the Velineon 3500 Brushless Motor (up to 60MPH) and Velineon VXL-3s ESC, along with the TQi 2.4Ghz radio, low center gravity chassis, Shaft-Driven 4WD, and Rally long travel suspension.
Innovative New Chassis
Traxxas 1/10 Rally Racer Brushless RC Car
Extreme Brushless Power and 4WD requires a chassis that won't flex under load for arrow-straight, hard-charging acceleration. To offer the required rigidity, smoothly integrated ribs form a triangulated structure that's optimized for the loads imparted by the suspension and powertrain. Underneath, the chassis is ultra-smooth to reduce drag and prevent snags driving through brush.
All New Low Center of Gravity Chassis
Traxxas 1/10 Rally Racer Brushless RC Car
Rally introduces a new low center of gravity chassis for the ultimate handling experience. The race-tuned ride height paired with the high-performance Ultra Shocks deliver off-road versatility that allows you to tackle rough terrain and big obstacles. On the track, the advantage of a low center of gravity (cg) is noticed instantly by the lower lap times.
Ultra Efficient Shaft-Driven 4WD
Traxxas 1/10 Rally Racer Brushless RC Car
Perfect Weight Bias
Traxxas 1/10 Rally Racer Brushless RC Car
Each component on the chassis was carefully positioned for optimal weight distribution and space utilization. The result is perfect weight bias for neutral handling precision. The bulk of the mass is distributed down the centerline of the chassis for smooth, stable cornering.
Modular Simplicity
Traxxas 1/10 Rally Racer Brushless RC Car
Old designs made servicing of 4-wheel drive vehicles cumbersome and time-consuming. Traxxas has a better way. Modular design allows the entire front section to be removed with just 5-screws, and the rear assembly with just 4-screws.
|