Eagle Racing M06 parts list

由0開始到完成左，其實好多PARTS買左返黎都係用兩三件。剩底的留返做士啤PARTS啦.
有D其實唔想用金屬件，但用膠件又差D件唔知邊道找、禁最後唔想煩就只好用金屬件LA。
Part List:

Eagle Racing M06-Pro kit
Tamiya (#51432) M-06 A Parts (Chassis)
Tamiya (#51433) M-06 B Parts (Battery Holder)
Tamiya (#51391) M-05 C Parts (Suspension Arm)
Tamiya (#51434) M-06 D Parts (Gearbox)
Tamiya (#51435) M-06 E Parts (Damper Stay)
Tamiya (#51425) M-05Ra F Parts (Upright)
Tamiya (#54208) 5x8mm Fluorine Ball Connector
Tamiya (#53601) Low Friction 5mm Adjuster
Tamiya (#50596) 5mm Adjuster
Tamiya (#54248) 3x23mm aluminum Turnbuckle Shaft
Tamiya (#51437) M-06 Urethane Bumper
Tamiya (#53631) TRF Short Damper Spring(Medium)
Tamiya (#53632) TRF Short Damper Spring(Hard)
Tamiya (#84118) M-Chassis Aluminum Damper Set
Yeah Racing (#M05-042BU) Aluminum Ball Bearing Steering Set (BU
Yeah Racing (#M05-098BU) Aluminum Light Weight Gear Shaft Set (
Yeah Racing (#PIN-210) Pin 2x10mm (10 Pcs)
Yeah Racing (#YA-0180) Tornado High Speed Cooling Fan 30 x 30mm
Yeah Racing (#M03-005BU) Alloy Bearing C-Hub (BU) For M03M, M05
Yeah Racing (#Pin-210) Pin 2x10mm
3Racing (#3RAC-SHAMU) Servo Saver for Tamiya F104
3Racing (#M03M-03/LB) Alum Front Lower Suspension Arms (LB)
3Racing (#M03M-10/LB) Alum Rear Lower Suspension Arms (LB)
3Racing (#M03M-11/V3) Swing Shaft Ver. 3 For M03M
3Racing (#M03M-17/HD) Rear Axles (Heavy Duty)
3Racing (#M03M-12/2/LB) Alum Rear Hub Carrier 2 Degree For M03M
3Racing (#M05-02) Fast Gear Set for M05
Tuneup- Aluminum Steering Linkage 92mm
5mm Ball Connector x around 12
1150 Bearing x 12 850 Bearing x6 1050 Bearing x4
3x12mm Screw
M-chassis Wheel & Tire & LockNut
210mm Wheelbase Body

鑼C我去五金店跟雙星果SET汁
3x6mm screw x 2pcs.
3x8mm screw x 7pcs.
3x10mm screw x 42pcs.
3x12mm screw x 13pcs.
3x15mm screw x 10pcs.
3x18mm screw x 2pcs.
3x25mm screw x 1pc.
3x8mm hex screw x 2pcs.
3x10mm hex screw x 3pcs.
3x12mm hex screw x 2pcs.

回復 spawn1126 的帖子

wooo....how much does it cost..for this M06??

WORTH?

其實避震，C HUB同尾2度杯其實可以用返膠件。齒差用返雙星又會平D。
大致上個LIST加返電子野應該無咩漏

u love m06 so much?

我手快快買左套KIT返黎，無理由唔砌嫁。
有D野無話值唔值，自己鐘意就得啦.

師兄我都好似你o甘, 買o左套 Eagle Racing M06-Pro kit. 仲度緊點攪. 因為我都對過令件表, 其實好多膠件係要迫住買. 除o左五金o野,好似會多部 m06 o甘多料出o黎 ~ 不過我都覺得, 玩得 R/C 就最緊要係鍾意. 星星除o左多 option 外, 原來膠料錢都唔放過 !

GOOD! 請問埋單幾錢?

Parts around 1K (not include wheel & sheel ﹠ eagle racing kit)

A part 用2件, B & E 用1件

回復 epc_mem 的帖子

就係記得你問過我先出呢個POST

多謝師兄 !!!

好有用的資料.......多謝師兄的無私奉獻

I have a old m03.  also bought eagle racing m06 upgrade kit.

still not sure to buy different parts like c-hing.  or simply buy 1 box of m06

if you will upgrade to the option parts, then i think just buy option part like me to built it will cheaper than buy a M06 + option part.

yes ,better than buy origioal m-06

Nice car~~
好唔好跑呀？我都想訂返套玩下~~