RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1324|回復: 1
收起左側

Any simple way to make 'Supercharge' engine?

[複製鏈接]
TheWolf 發表於 2011-8-3 07:19:17 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Just think about adding a small cooling Fan in the front of the air intake (air filter) to inject compressed air to boost the engine.  Of course need to tune the needles again.... Any Ching did think about this approach just for fun?   

Alternatively, may make a air tunnel directing the air from front side, eg bumper, to air filter pose....

Any Idea sharing?  
beebone 發表於 2011-8-3 09:48:19 | 顯示全部樓層

I had the same idea want to try, but in trubo charger.
See this, http://www.youtube.com/watch?v=rQxvowrAUNY
The mini turbo can reach over 1 bar boost in 90,000 rpm, but the the boost is not stable. I think 0.2 bar is good for RC nitro.

Same as turbo charger, the superchager needs intercooler for sure to avoid knocking in high rpm, also, the compression ratio shd be higher (how much higher, really no idea, have to try)

The fuel adjustment is also a problem, the AFR shd be rich enough for high rpm, but the low end will very lack of power. Too lean will knock and harm the conrod. So the clutch set up is also important.

您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-29 12:50 , Processed in 0.037440 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表