叉电問題 未解决

点解我D NiMh 电叉完之後放落去,架車好以无力,好似无乜电咁,用meter check voltage 又好正常,点解呢?
点解决?

原帖由 vrally582 於 2006-7-24 02:56 發表
点解我D NiMh 电叉完之後放落去,架車好以无力,好似无乜电咁,用meter check voltage 又好正常,点解呢?
点解决?

first question, how old are the batteries?

用meter check voltage 又好正常,点解呢?

this is normal. however, as soon as you put a load on the batteries, there will be a voltage drop....for dead batteries, the voltage drop will be so significant that the motor will not receive enough power.

more than 1  year. but not often use it. so how to cure it ?

Even i use it for the D cam and  the radio for  tamiya 1/10 car. They both show low battery   
The battery is dead? If yes, how to avoid this happen again?

in that case it's either your batteries or your battery charger dead....