[CENTER][/CENTER]
Novak isn’t a stranger to innovation. It has repeatedly brought original products and technological advancements to the R/C industry, and, to no one’s surprise, Novak is doing it again! The[B] Ballistic 550 Brushless Motors (#3504-#3506)[/B] are the first 550-sized motors to break into short course competition and easily outperform traditional 540-sized motors. The Ballistic 550s are so powerful because of their [B]extra long stator and rotor magnet[/B]. In fact, the stator and rotor magnet are twice the length of 540-sized motors, giving them[B] twice the torque[/B] of an equivalent 540 motor. The more torque, the more speed that is generated! Additionally, these larger-sized motors [B]run cooler[/B] and [B]more efficiently[/B] than their 540 counterparts. These high-powered machines are the motors of choice at small, indoor race tracks and easily install into OFNA’s® Hyper 10 SC Pro 4x4 Kit™, OFNA’s® Jammin’ SCRT 10 4X4 Kit™, Traxxas’® Slash 4X4 4WD Short Course Trucks™ and many other 1/10-scale short course trucks.
In addition to its already impressive features, including [B]low-speed driveability[/B] and [B]no cogging[/B], the Ballistic 550s have also been fitted with[B] rugged 5mm output shafts[/B] for maximum resilience and race life. Additionally, the motors are [B]sensor-based[/B] for a smooth and controlled power delivery.
[B]BALLISTIC MEANS VERSATILITY[/COLOR][/B]
And like the Ballistic name implies, these motors are completely rebuildable and feature[B] interchangeable wound stator construction[/B]. There are four[B] Ballistic 550 Wound Stators (#S6504-#S6507)[/B] available with more to come! A simple stator swap allows for easier experimentation at the track and cuts down on racing costs. And like all of Novak’s Ballistic motors, the Ballistic 550s feature a replaceable rotor, front end bell, sensor harness, bearings and other replaceable items.
[B]SPEED CONTROL COMPATIBILITY[/COLOR][/B]
All of the Ballistic 550 motors are compatible with Novak’s[B] Kinetic Racing Brushless ESC[/B] (#1740), [B]Havoc Pro Brushless ESC[/B] (#1735), [B]GTB Programmable Racing Brushless/Brush ESC[/B] (#1710 / #1711), [B]Havoc 3S Brushless/Brush ESC[/B] (#1733) and any other sensored brushless speed control.
[CENTER][/CENTER]
[CENTER][B]Exploded view of Ballistic 550 Brushless Motor[/FONT][/B][/CENTER]
[CENTER] [B]BALLISTIC 550 BRUSHLESS MOTOR FEATURES [/B] [I]Sensor-based for excellent torque and low-speed driveability[/SIZE][/FONT][/I] [I]Oversized front bearing for increased load handling and bearing life [/SIZE][/FONT][/I] [I]Rebuildable design with removable shielded sensor harness, sensor assembly, wound stator, hardware, insulation, bearing cap, bearings and both end bells[/SIZE][/FONT][/I] [I]Nickel-plated, sintered Neodymium rotor with a 5mm pinion shaft that accepts all existing pinion gears [/SIZE][/FONT][/I] [I]Adjustable timing to help retain previous user settings[/SIZE][/FONT][/I] [I]Meets RoHS compliance and includes 120-Day Warranty[/SIZE][/FONT][/I] [I]Designed, hand wound and dyno tested by Novak in Irvine, Calif., using globally sourced components[/SIZE][/FONT][/I] [B]BALLISTIC RACING 550 MOTOR SPECS[/B] [CENTER][B]Ballistic Motors[/SIZE][/FONT][/B][/CENTER]
[CENTER][B]4.5T[/SIZE][/FONT][/B][/CENTER]
[B]5.5T[/SIZE][/FONT][/B]
[B]6.5T[/SIZE][/FONT][/B]
[B]7.5T[/B]*[/SIZE][/FONT]
[B]Part Number[/SIZE][/FONT][/B]
#3504[/SIZE][/FONT]
#3505[/SIZE][/FONT]
#3506[/SIZE][/FONT]
#S6507[/SIZE][/FONT]
[B]Design[/SIZE][/FONT][/B]
Sensor-based[/SIZE][/FONT]
[B]Input Voltage[/SIZE][/FONT][/B]
2S-3S Li-Po[/SIZE][/FONT]
2S-3S Li-Po[/SIZE][/FONT]
2S-4S Li-Po[/SIZE][/FONT]
2S-4S Li-Po[/SIZE][/FONT]
[B]Kv (unloaded)[/SIZE][/FONT][/B]
5,000 RPM/Volt[/SIZE][/FONT]
3,700 RPM/Volt[/SIZE][/FONT]
3,400 RPM/Volt[/SIZE][/FONT]
3,000 RPM/Volt[/SIZE][/FONT]
[B]Watts[/SIZE][/FONT][/B]
890[/SIZE][/FONT]
800[/SIZE][/FONT]
730[/SIZE][/FONT]
620[/SIZE][/FONT]
[B]Magnet[/B][/SIZE][/FONT]
One-piece, multi-pole Neodymium[/SIZE][/FONT]
[B]Motor Size[/SIZE][/FONT][/B]
2.84" x 1.41" (72.1 x 35.8mm)[/SIZE][/FONT]
[B]Motor Weight[/SIZE][/FONT][/B]
10.1oz. (286.3g)[/SIZE][/FONT]
[B]Shaft Diameter[/SIZE][/FONT][/B]
5mm[/SIZE][/FONT]
[/CENTER]
[I]* Ballistic 550 Woudn Stator -- 7.5T (#S6507) can be easily installed into any Ballistic 550 and attain these specifications.[/SIZE][/FONT][/I]
Source: Novak |