Monster用Overland殼既問題!

我想整架Monster用Hummer車殼
d位難唔難整!?

見到d人用H1同H2都好型...好想改

原帖由 waikit114 於 2006-6-25 12:38 發表
我想整架Monster用Hummer車殼
d位難唔難整!?

見到d人用H1同H2都好型...好想改

Simply remove the cover mount from any monster's cover, then, remove the cover mount from OL Hummer H1/H2 and glue the monster cover mount into the OL cover then you are DONE!
I have done it with a Harrier cover and the outcome is very nice!  But make sure you need to adjust the height of the cover in order to make sure while you turn or hit a bump, the wheels wouldn't hit the cover....
Good luck!  

介唔介意講中文呀...英文唔多得呀我~o~

原帖由 waikit114 於 2006-6-25 14:22 發表
介唔介意講中文呀...英文唔多得呀我~o~

Sorry I don't write Chinese....  I can read but I can't write....  
Can some brothers help me out??

原帖由 mikewu 於 2006-6-25 14:19 發表


Simply remove the cover mount from any monster's cover, then, remove the cover mount from OL Hummer H1/H2 and glue the monster cover mount into the OL cover then you are DONE!
I have done it w ...

意思大致上係 : 把overland 同 monster 的車殼 mount 拆掉後互換, 但要注意調教車殼的高度, 如果唔係monster 的大轆會揩到個殼!

原帖由 J 於 2006-6-25 21:23 發表

意思大致上係 : 把overland 同 monster 的車殼 mount 拆掉後互換, 但要注意調教車殼的高度, 如果唔係monster 的大轆會揩到個殼!

Thank you brother!

哦~等我試下改啦咁~唔該晒