RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2549|回復: 18
打印 上一主題 下一主題
收起左側

我的18仔車隊

[複製鏈接]
跳轉到指定樓層
1#
bidforfuns 發表於 2009-5-30 22:49:52 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Team Losi LST2, HPI Micro RS4 (2 used; 1NIB), NRX18, HBX18 and one 1:20 Vintage
2#
tekin 發表於 2009-5-30 22:51:02 | 只看該作者
too many 1:18,
do you have xray M18???
3#
 樓主| bidforfuns 發表於 2009-5-30 22:53:36 | 只看該作者
XRay...no ar.....wa...............
4#
 樓主| bidforfuns 發表於 2009-5-30 22:55:49 | 只看該作者
5#
 樓主| bidforfuns 發表於 2009-5-30 22:56:39 | 只看該作者
Exceeded  upload limit......tomorrow upload more photos for sharing
6#
 樓主| bidforfuns 發表於 2009-5-30 23:10:08 | 只看該作者
7#
nobuster 發表於 2009-5-31 00:24:35 | 只看該作者
架 micro rs4慢你一步,有兩架就唔好同我爭(講笑)
我都係好喜歡18仔, 遲d都會入多架rc18r, 之後就係mini lst, ta既車我只有micro-t
8#
 樓主| bidforfuns 發表於 2009-5-31 00:58:31 | 只看該作者
I also bidded another HPI Micro RS4 (blue shell)
http://hk.f2.page.auctions.yahoo ... 615213?r=1179715669
Not get the RC car yet.
If interest, can transfer to you.

BTW, now I like 1:24 (not MiniZ) and 1:18 RC cars. With FUNS!
9#
nobuster 發表於 2009-5-31 02:00:30 | 只看該作者
多謝先, 雖然有興趣不過交收有問題
10#
bigcow 發表於 2009-5-31 02:06:14 | 只看該作者
恭喜師兄又有新車仔,再有細車仔call你
11#
jackyrc 發表於 2009-5-31 02:27:22 | 只看該作者
本帖最後由 jackyrc 於 2009-5-31 02:30 編輯

原裝呔好飄.比較難控.
車呔改XRAY.會好咬地,再頭單尾珠.會好正.
12#
 樓主| bidforfuns 發表於 2009-5-31 08:59:34 | 只看該作者
10# bigcow
也要謝謝師兄你肯出讓
13#
 樓主| bidforfuns 發表於 2009-5-31 09:01:28 | 只看該作者
14#
 樓主| bidforfuns 發表於 2009-5-31 09:19:15 | 只看該作者
15#
bennymok 發表於 2009-5-31 18:13:03 | 只看該作者
the orange car shell at the middle is pretty good!!!! When car model
16#
tekin 發表於 2009-5-31 18:33:35 | 只看該作者
full option of HBX18, where to buy???
17#
 樓主| bidforfuns 發表於 2009-5-31 19:03:26 | 只看該作者
18#
 樓主| bidforfuns 發表於 2009-5-31 19:05:18 | 只看該作者
1# bidforfuns

KYOSHO 1:20 Vintage, see below thread:

http://bbs.rc-evo.com/viewthread.php?tid=128302
19#
 樓主| bidforfuns 發表於 2009-6-1 22:22:05 | 只看該作者
16# tekin

I brought it 2nd hand from RC Evolution CHing.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-5-1 12:20 , Processed in 0.145608 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表