MINI Z & KO控

請問各位用KO控既師兄, 特別係EX-10, 有無跟KO網以下既SETTING呢??


http://kopropo.com/america/support/mini-z-help-center/

2.4GHz ASF Settings
Setting up your 2.4GHz Kyosho Mini-Z with any of our supported KO brand transmitters with modules, you will need the following settings.

• Set the steering Travel
  
                                 
  登錄/註冊後可看大圖
  to 70 or 70%.
• Set the steering Balance to NO MORE then 70%.
• Set the throttle High Point to 60.
• Set the throttle Brake to 60.
• DO NOT use the Quick Steering or Quick Throttle Response found in the EX-1 UR transmitter.
  

These settings for your transmitter will help to ensure that you 2.4GHz Mini-Z will operate correctly.

kevt2005 發表於 2014-3-27 00:09
When I first bought my MR03 stock car, I followed the recommended settings.  As I started upgrading  ...

Well noted your suggestion, I will try the different of steel travaling point at 70%. - 100% accordingly.
Acutally, I play drift with my comic racer only, 70% of ST angle might not enough.