RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: new kyosho fortune 612 [打印本頁]

作者: asaka 時間: 2008-6-9 21:04
標題: new kyosho fortune 612
new kyosho fortune 612. just bought from KWS @ 1080

Do I need to upgrade servo?

: 登錄/註冊後可看大圖

作者: asaka 時間: 2008-6-9 22:27
各位大佬請問原裝發射器有效範圍係幾多呢

作者: 周百通 時間: 2008-6-10 00:17
可以遠到分唔到船頭船尾！

作者: RCCC 時間: 2008-6-10 07:45

原帖由 周百通 於 10-6-2008 00:17 發表

 登錄/註冊後可看大圖

可以遠到分唔到船頭船尾！

一去不返

作者: asaka 時間: 2008-6-10 10:36
do i need tp upgrade servo?

作者: 周百通 時間: 2008-6-10 13:54
去KWS鴻猩問吓

作者: 丘引 時間: 2008-6-10 14:48

原帖由 周百通 於 2008-6-10 13:54 發表

 登錄/註冊後可看大圖

去KWS鴻猩問吓

果然喺模型介裹的專業高手

作者: 周百通 時間: 2008-6-10 19:35

原帖由丘引於 2008-6-10 14:48 發表

 登錄/註冊後可看大圖

丘引果然喺模型介裹的專業高手

:lol

作者: bigcar 時間: 2008-6-10 21:32

原帖由 周百通 於 10-6-2008 19:35 發表

 登錄/註冊後可看大圖

移花接木??

作者: 丘引 時間: 2008-6-11 11:03

原帖由 bigcar 於 2008-6-10 21:32 發表

 登錄/註冊後可看大圖

移花接木??

喺喎,咁佢都得

作者: noble 時間: 2008-6-11 23:37

原帖由 asaka 於 2008-6-9 21:04 發表

 登錄/註冊後可看大圖

new kyosho fortune 612. just bought from KWS @ 1080

Do I need to upgrade servo?

asaka兄！我都係帆船友嚟！
隻新款612睇落好喎！

有冇全身相睇吓咁呀！！

作者: asaka 時間: 2008-6-13 01:04
this is my first R/C boat

作者: Skipper 時間: 2008-6-23 21:46
One of my boat friend owns this small sail boat, and he borrowed this boat to me for a trail run in last year. In my opinon, this small yacht is not suitable to play at wild sea, especially with wind force higher than BF 2. My advise for this small yacht is that you should play this tiny yacht in model boat pool.

This is a beginner type r/c yacht, ready to run without modification, but upgrade the sail servo will make you react more quickly on the control of sail with response to change of wind direction.

作者: asaka 時間: 2008-6-24 10:07
brother skipper, sail servo has big size, the RTR ones are both futaba 3003 size. pls advise so.

作者: Skipper 時間: 2008-6-24 19:14

原帖由 asaka 於 2008-6-24 10:07 發表

 登錄/註冊後可看大圖

brother skipper, sail servo has big size, the RTR ones are both futaba 3003 size. pls advise so.

Sail servo is not suitable due to its bigger size, and huge torque output for this tiny sail boat.

The point to "Upgrade servo", is to increase the torque output under the same physical size. You may ask shop keepers at KWS, which brand/model has more torque output but with same size of model 3003.

From Internet, "Futaxx" servo model 3003 is a standard servo, with dimensions 1.6 x 0.8 x 1.4 in, output torque is 44.4 oz-in at 4.8 volts.

Both "Futaxx" S3010 and S3305 servos has higher torque output (72.2/98.6 Oz-in.), with almost same dimensions(1.6 x 0.8 x 1.5 in.) of S3003

http://www.futaba-rc.com/servos/servos.html

Before upgrade the, you should check and ensure the size of new servo can be fit into the servo mounting/hull.

In the summer of 2006, one of my boat friend has upgraded his Fortune 612 by equipped with "HI-Txx" servo. The result is that he can pull the sail inward at sooner time, and the boat can pick up speed more promptly and go faster.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)