RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Sand Scorcher, Rough Rider...No ! He 's MIP 4X4 [打印本頁]

作者: barrypops    時間: 2006-2-6 01:02
標題: Sand Scorcher, Rough Rider...No ! He 's MIP 4X4
識貨之人,便知道"佢"係乜嘢料
Finally, put them together !
It 's the  most expensive one in my collections.
If you a super fan of Sand Scorcher, you will know how rare it 's !
I collected them all bit by bit in four years !

I saw him in the 搖控模型月刋 in the past ( 80's ), they called him MIP 4X4 !!!

He used a soft cable for the 4WD !
Very light weight !

[ 本帖最後由 barrypops 於 2006-2-6 01:08 編輯 ]
作者: barrypops    時間: 2006-2-6 01:06
Forgot to say, the Corba motor from Amat兄 , thanks !
作者: speedstar    時間: 2006-2-6 01:10
大開眼界
作者: minimini    時間: 2006-2-6 10:01
wow.....喺嗰個年代, 淨係見到呢隻色嘅 plastic 就知唔嘢少啦......
作者: beebee    時間: 2006-2-6 11:50
有冇口水肩啞.......我頂唔順啦.....超正
作者: surfhk    時間: 2006-2-6 21:02
Oh.........speechless............ *O*
作者: barrypops    時間: 2006-2-6 22:49
估唔到大家都係絕版搖控車嘅super fans, 果然連MIP(當年) 都識.....勁!
作者: ray9394    時間: 2006-2-7 11:43
I can't see the front gear box or drive shafts, so is it driven by any other system which is differnt from the
modern drive train but the "cable" drive system, in the last pic is just amazing.
Thank you so much for the sharing.
Ray
作者: minimini    時間: 2006-2-7 21:50
最後嗰幅相條膠喉咩來架 ??
作者: AMAT    時間: 2006-2-7 21:58
原帖由 barrypops 於 2006-2-6 01:06 發表
Forgot to say, the Corba motor from Amat兄 , thanks !


你俾錢買O架哥仔!駛乜THX我唧!哈!

SOFT CABLE.......即係好似要嚟通渠果O的咁一條軟彈弓嚟驅動!?哈!
作者: barrypops    時間: 2006-2-8 00:08
條膠喉要嚟保護條~通渠果O的咁一條軟彈弓SOFT CABLE囉
作者: barrypops    時間: 2006-2-8 00:10
原帖由 AMAT 於 2006-2-7 21:58 發表


你俾錢買O架哥仔!駛乜THX我唧!哈!

SOFT CABLE.......即係好似要嚟通渠果O的咁一條軟彈弓嚟驅動!?哈!


大哥Amat!禮貌......同緣份嗎!哈!
作者: AMAT    時間: 2006-2-9 21:19
原帖由 barrypops 於 2006-2-8 00:08 發表
條膠喉要嚟保護條~通渠果O的咁一條軟彈弓SOFT CABLE囉


即係我冇估咗個驅動方式啦?哈!

又幾搞野喎~!
作者: Sin    時間: 2008-3-10 23:01
Even this post is old, but I think is worth to share again!!
作者: fat_fat_cat    時間: 2008-3-11 00:25
$75 for each single front susp arms, $150 for each single real arms, $65 for front bumper, $300 for real cage, and $350 for the diff gear.....  close 20 years before
Please correct me if wrong......
作者: tiger1    時間: 2008-3-11 07:49
HKD$250 for MIP differential. I think Thorp was more expensive.
作者: fat_fat_cat    時間: 2008-3-11 08:19
HKD$350, yes thorp and parma.




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) Powered by Discuz! X3.2