RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: YR ISTC BRCA Body Gauge; F/R Damper Stay, F/R Gear; Rear Hub/Knuckle arm 3degree [打印本頁]

作者: Dinballian 時間: 2013-7-5 17:55
標題: YR ISTC BRCA Body Gauge; F/R Damper Stay, F/R Gear; Rear Hub/Knuckle arm 3degree

Yeah Racing 1/1- EP Touring Car Body Gauge For ISTC BRCA

登錄/註冊後可看大圖

Item No. #YT-0067BU

登錄/註冊後可看大圖

This is a gauge to aid racers conforming to ISTC and BRCA race regulations. The gauge comes with preset markings and openings to measure Body height, Rear body height, Wing's overhang and wing Chord/End Plates to conform with ISTC and BRCA accordingly.

Item No. #YT-0067GM

Yeah Racing Aluminum Front/Rear Damper Stay For Tamiya TT02 #TTBU

登錄/註冊後可看大圖

This is a Yeah Racing Aluminum Damper Stay for TT02. The kit is a simple replacement for the stock front or rear plastic damper stay so 2 kits will be needed to upgrade all the damper stay on a TT02. In comparison to the stock damper stay, Yeah racing constructed the stay with high grade aluminum in blue. Not only your RC will look cooler with the Yeah Racing stand but it will also gives you better handling with the extra sturdiness and capable to withstand more impacts, benefiting from aluminum and precise craftsmanship. Yeah Racing damper stand also featured 3 different angles for the damper position, which gives more options for serious tuner fine tune your TT02.

Item No. #TT02-08BU

Yeah Racing Steel Front / Rear Gear Joint For Tamiya TT02 #TT02-017

登錄/註冊後可看大圖

This is the Yeah Racing Steel Front/Rear Gear Box Joint for Tamiya TT02. Great upgrade from the stock plastic part or could be used as a replacement of the broken parts. Yeah racing carefully crafted this item with high grade of material for maximum durability. Less room for flexing compare to the standard parts and therefore smoother acc/deceleration can be achieved. Additionally more power from the motor could be directly deliver to the wheels.

Item no. TT02-017

Yeah Racing Aluminum Rear Hub/Knuckle Arm 3 Degree For Tamiya TT02 #TT02-007-3BU

登錄/註冊後可看大圖

Yeah Racing Aluminum Rear Hub/Knuckle Arm 3 Degree is designed for Tamiya TT02 RC Cars. It will set the rear hub with toe in 3 degree. It is a great upgrade from standard stock part which allows TT02 to run stably.

Using this tool, you can also adjust the RC Cars to normal or High ground clearance.

Item No. #TT02-007-3BU

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)