RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 新手 M-CAR ... [打印本頁]

作者: inch123456 時間: 2011-5-10 20:28
標題: 新手 M-CAR ...
本帖最後由 inch123456 於 2011-5-11 09:17 編輯

M05: 74x
Radio + servo: 34x
Charger + battery: 23x
Tools + Paint: 150

登錄/註冊後可看大圖

First time to paint and cut the body..... so ....

登錄/註冊後可看大圖

Please Help........when the car is accelerated to straight, it turns a bit right...... .what and where should I set the car??? ..

登錄/註冊後可看大圖

Regret for battery and Charger...only play for 5-10 mins but charging for long time... time to think for new one to play longer time.....

登錄/註冊後可看大圖

作者: hei_choro 時間: 2011-5-10 20:46
你set電同差機絕對俾人呃左錢

作者: inch123456 時間: 2011-5-10 20:48
回復 hei_choro 的帖子

YES....very disappointed in that store....old things and not useful..

any good chargers and not expensive suggest?

作者: hei_choro 時間: 2011-5-10 21:02
B6差機幾好用
$250上落

作者: inch123456 時間: 2011-5-10 21:11
回復 hei_choro 的帖子

with power supply?

作者: hei_choro 時間: 2011-5-10 21:30
Yes
And all sorts of adaptors

作者: albertau2011 時間: 2011-5-10 21:31

inch123456 發表於 2011-5-10 20:48

登錄/註冊後可看大圖

回復 hei_choro 的帖子

YES....very disappointed in that store....old things and not useful..

C Hing, which shop ???

作者: Allan007 時間: 2011-5-10 22:09
回復 inch123456 的帖子

呢類平叉機其實已經好好用，不過要另買火牛。
今日我都試完部M05，很好玩

[attach]493412[/attach]

作者: inch123456 時間: 2011-5-10 22:13
回復 Allan007 的帖子

how much is it? 平叉機+火牛 ..dont want to be fooled...

作者: inch123456 時間: 2011-5-10 22:13
回復 Allan007 的帖子

how much is it? 平叉機+火牛..and where can get this ......dont want to be fooled again......

thanks..

作者: inch123456 時間: 2011-5-10 22:14
回復 hei_choro 的帖子

seem goods...around 250 for 叉機+火牛......which store?

thanks..

作者: inch123456 時間: 2011-5-10 22:15
回復 albertau2011 的帖子

dont want to say this store.............as i did not do enough research before buy it....

作者: Allan007 時間: 2011-5-10 22:32
回復 inch123456 的帖子

呢類B6差機$250上下，包埋一大"乍"線。有D平火牛個樣係好似notebook火牛咁，直接插去部B6度，我未買過，不過我估頂多一百，超過一百要格多兩間。
KWS鋪頭穩陣少少就真係「食粥」，雖然佢把口都冇乜收，不過佢應該唔會老點D生客。
對面果間真係睇人黎趙，我領果野同親眼睇過佢幾次趙人。

作者: inch123456 時間: 2011-5-10 22:52
回復 Allan007 的帖子

「食粥」.....=> Axxxx Hxxxx?

http://kkchung.pixnet.net/blog/post/26877477

作者: batcat 時間: 2011-5-10 23:01
本帖最後由 batcat 於 2011-5-10 23:05 編輯

inch123456 發表於 2011-5-10 22:52

登錄/註冊後可看大圖

回復 Allan007 的帖子

「食粥」.....=> Axxxx Hxxxx?

Yes, bingo.

作者: inch123456 時間: 2011-5-10 23:05

thanks

作者: JV西人 時間: 2011-5-11 02:00
新手…點都要交學費

作者: inch123456 時間: 2011-5-11 09:18
本帖最後由 inch123456 於 2011-5-11 09:18 編輯

回復 JV西人的帖子

haha.....want to pay less 學費

作者: albertau2011 時間: 2011-5-11 09:44
1/F, 11/F, 22/F 都 ok 呀

作者: BMW2011 時間: 2011-5-11 10:51
本帖最後由 BMW2011 於 2011-5-11 10:54 編輯

回復 inch123456 的帖子

.......收pm.................

作者: inch123456 時間: 2011-5-11 12:18
回復 albertau2011 的帖子

where is it? 1/F, 11/F, 22/F 都 ok 呀

作者: albertau2011 時間: 2011-5-11 12:22

inch123456 發表於 2011-5-11 12:18

登錄/註冊後可看大圖

回復 albertau2011 的帖子

where is it? 1/F, 11/F, 22/F 都 ok 呀

地址 : 香港旺角煙廠街興發商業大廈

作者: inch123456 時間: 2011-5-11 12:27
回復 albertau2011 的帖子

thanks...

作者: albertau2011 時間: 2011-5-11 12:31

inch123456 發表於 2011-5-11 12:27

登錄/註冊後可看大圖

回復 albertau2011 的帖子

thanks...

see u in JV

作者: inch123456 時間: 2011-5-11 21:05
回復 Allan007 的帖子

ching.....can i see your 火牛, please ? today i went to check....the 火牛 can be very professional..

作者: Allan007 時間: 2011-5-11 21:50
回復 inch123456 的帖子

This is my "fire-cow". Yes, it was relatively expensive. A good power supply can provide a stable output. Mine is capable to supply 24A, which is high enough to power 2 high performance chargers.

My philosophy is that if an expensive device can be used for a long period of time, such as a high quality servo, it is worth the money. Now if I want to upgrade my charger, I can still use this power supply.

[attach]493746[/attach]

[attach]493747[/attach]

作者: inch123456 時間: 2011-5-11 22:07
回復 Allan007 的帖子

thanks.....

作者: zivtong 時間: 2011-5-12 23:28
老實講，最大既學費係買錯車
m05.......

我第一部車都係m05
但，真係唔好走～快少少都反～落既option，anti rollbar都係冇用
依家我玩abc 同埋xevo都冇話咁樣反法....
始終m05重心高
車架重
又易爛

作者: inch123456 時間: 2011-5-13 09:51
本帖最後由 inch123456 於 2011-5-13 09:52 編輯

回復 zivtong 的帖子

oic.... thanks....as i like the mini cooper one...so M05.....and now just used the white motor......still long way ...

作者: Allan007 時間: 2011-5-13 10:00

zivtong 發表於 2011-5-12 23:28

登錄/註冊後可看大圖

老實講，最大既學費係買錯車
m05.......
我第一部車都係m05

Oh, I don't think so. My M-05 is very good at handling. I run it with a 7.5R motor at JV and can follow some tourings.

作者: Madbull 時間: 2011-5-31 23:39
千其咪去SSP - "晶"藝, 乃咗嘢

作者: inch123456 時間: 2011-5-31 23:44
回復 Madbull 的帖子

how was that?

作者: greenbug 時間: 2011-6-7 09:34
回復 Madbull 的帖子

Ching 分享吓啦!!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)