RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: QC of VM II (Problems solve) THX ANDY [打印本頁]

作者: koji1230    時間: 2009-6-27 22:26
標題: QC of VM II (Problems solve) THX ANDY
本帖最後由 koji1230 於 2009-6-29 21:38 編輯

QC of VM II.............
wrong motor mount
left  & right is different in manual,
but i have only 2 pcs of riht side .....
need to chage @ monday
any brother like me???
and the ball diff. is so loose,i can't set it tightly.......:L
so unlucky me

today i go to the shop,and andy is very very good service,he open a new VM II and give me to change the parts,motor mount and ball diff.THX ANDY
作者: hitlau    時間: 2009-6-27 22:29
  好在我未買。。。
作者: 楓仔    時間: 2009-6-27 22:38
CHECK CHECK 先!!!!!
作者: 丫De    時間: 2009-6-27 22:49
會唔會只係包裝零件果陣 錯手汁錯左

試下有冇得換啦
作者: stack    時間: 2009-6-27 23:04
can change!
作者: minimini    時間: 2009-6-27 23:40
諗番轉頭.........其實好似 ABC 或者 Xpress 咁..........."factory pre-assembled"...........都未必係唔好.........
作者: 楓仔    時間: 2009-6-28 00:18
冇事!!!
作者: koji1230    時間: 2009-6-28 00:28
冇事!!!
楓仔 發表於 2009-6-28 00:18

thx imforation
作者: BHP    時間: 2009-6-28 00:33
Sorry to hear that bro!
Must be very disappointing  =(
作者: koji1230    時間: 2009-6-28 01:28
Sorry to hear that bro!
Must be very disappointing  =(
BHP 發表於 2009-6-28 00:33

yes........can't play it tmr
作者: chacha    時間: 2009-6-28 02:00
1# koji1230


唔使裝摩打
作者: -69-    時間: 2009-6-28 02:18
好小事傘!一定有得換,放心Wor. 九成九係包裝部人仕包錯. ;-)
作者: tekin708    時間: 2009-6-28 07:21
QC of VM II.............
wrong motor mount
left  & right is different in manual,
but i have only 2 pcs of riht side .....
need to chage @ monday
any brother like me???
and the ball di ...
koji1230 發表於 2009-6-27 22:26

what's meaning "the ball diff. is so loose,i can't set it tightly"???
作者: quakequake    時間: 2009-6-28 08:23
QC of VM II.............
wrong motor mount
left  & right is different in manual,
but i have only 2 pcs of riht side .....
need to chage @ monday
any brother like me???
and the ball di ...
koji1230 發表於 2009-6-27 22:26


D QC 噤都得,等我仲諗住去買tim,加下要諗諗啦。

作者: mschumi    時間: 2009-6-28 08:49
Xray  QC 都唔得啦!
少少問題,星期一就有得換,不知幾好.
環X 換,又話要影相,又話要點要點....
作者: lung1    時間: 2009-6-28 09:50
what's meaning "the ball diff. is so loose,i can't set it tightly"???
tekin708 發表於 28/6/2009 07:21

意思姐係個珠差整緊都係襟鬆....上唔實.........
作者: koji1230    時間: 2009-6-28 11:28
意思姐係個珠差整緊都係襟鬆....上唔實.........
lung1 發表於 2009-6-28 09:50

bingo .......
作者: lung1    時間: 2009-6-28 11:35
bingo .......
koji1230 發表於 28/6/2009 11:28

有無check 過壓力片/ 壓力啤鈴有無裝錯...?
作者: minimini    時間: 2009-6-28 11:52
意思姐係個珠差整緊都係襟鬆....上唔實.........
lung1 發表於 2009-6-28 09:50


有冇打散隻珠差再砌過 ??...........通常 factory pre-assembled 嘅嘢.........都係信唔過........
作者: tekin708    時間: 2009-6-28 12:09
有冇打散隻珠差再砌過 ??...........通常 factory pre-assembled 嘅嘢.........都係信唔過........
minimini 發表於 2009-6-28 11:52

agree, built it again.
作者: tekin708    時間: 2009-6-28 12:10
意思姐係個珠差整緊都係襟鬆....上唔實.........
lung1 發表於 2009-6-28 09:50

you can change xray 008 ball diff...
作者: tekin708    時間: 2009-6-28 12:13
Xray  QC 都唔得啦!
少少問題,星期一就有得換,不知幾好.
環X 換,又話要影相,又話要點要點....
mschumi 發表於 2009-6-28 08:49

xray of QC is good.
i bought new car of M18, FK04x2, FK05, 007x2, 008x4, these are high quality without any problem and mistake.
作者: lung1    時間: 2009-6-28 12:25
you can change xray 008 ball diff...
tekin708 發表於 28/6/2009 12:10

其實我反而想知ATOMIC 個珠差順唔順~ OK的話買隻FOR 008用~
作者: mschumi    時間: 2009-6-28 13:00
其實我反而想知ATOMIC 個珠差順唔順~ OK的話買隻FOR 008用~
lung1 發表於 2009-6-28 12:25

X2
作者: tekin708    時間: 2009-6-28 14:01
其實我反而想知ATOMIC 個珠差順唔順~ OK的話買隻FOR 008用~
lung1 發表於 2009-6-28 12:25

as my friend information, atomic ball diff of design is not same as xray. so xray may be better....
作者: koji1230    時間: 2009-6-28 14:10
有冇打散隻珠差再砌過 ??...........通常 factory pre-assembled 嘅嘢.........都係信唔過........
minimini 發表於 2009-6-28 11:52

i have built it again,but still so loose........
i will take it to the shop @ monday
作者: koji1230    時間: 2009-6-28 14:12
you can change xray 008 ball diff...
tekin708 發表於 2009-6-28 12:10

do u have spare ball diff. of 008??
sell it to me la
作者: tekin708    時間: 2009-6-28 14:14
i have built it again,but still so loose........
i will take it to the shop @ monday
koji1230 發表於 2009-6-28 14:10

too bad
but you can use 008 ball diff instead of atomic.
作者: abba    時間: 2009-6-28 14:24
其實我反而想知ATOMIC 個珠差順唔順~ OK的話買隻FOR 008用~
lung1 發表於 2009-6-28 12:25

唔好咁想,Xray珠差係無敵!你知!
作者: samuel20461    時間: 2009-6-28 15:16
土砲,差不多了.
作者: -69-    時間: 2009-6-28 16:45
其實我反而想知ATOMIC 個珠差順唔順~ OK的話買隻FOR 008用~
lung1 發表於 2009-6-28 12:25


我記得聽有關C兄說過係通用的. ;-)
作者: koji1230    時間: 2009-6-28 17:19
$16xx no carbon chassis,no shell,no tires.......
really hope the performance is better than my 210ss
作者: tekin708    時間: 2009-6-28 17:22
do u have spare ball diff. of 008??
sell it to me la
koji1230 發表於 2009-6-28 14:12

i have 100% new ball diff. of 008. but you can buy it in kws($3xx)
作者: tekin708    時間: 2009-6-28 17:25
唔好咁想,Xray珠差係無敵!你知!
abba 發表於 2009-6-28 14:24

agree x 2
作者: nastyboy    時間: 2009-6-28 17:42
吾知009條珠差裝吾裝到呢?因為我架009改左尾牙差,所以多左出來....
作者: koji1230    時間: 2009-6-28 17:46
吾知009條珠差裝吾裝到呢?因為我架009改左尾牙差,所以多左出來....
nastyboy 發表於 2009-6-28 17:42

the inner length of ball diff mount is 25mm,u can chech check
作者: tekin708    時間: 2009-6-28 17:49
吾知009條珠差裝吾裝到呢?因為我架009改左尾牙差,所以多左出來....
nastyboy 發表於 2009-6-28 17:42

008/009 of ball diff is suit for atomic
作者: minimini    時間: 2009-6-28 18:44
i have 100% new ball diff. of 008. but you can buy it in kws($3xx)
tekin708 發表於 2009-6-28 17:22


OMG........
作者: tekin708    時間: 2009-6-28 20:01
OMG........
minimini 發表於 2009-6-28 18:44

what is "OMG"?
作者: Xraylover    時間: 2009-6-28 20:06
O my god
作者: tekin708    時間: 2009-6-28 20:08
OMG........
minimini 發表於 2009-6-28 18:44

you mean ball diff out of stock in kws
作者: minimini    時間: 2009-6-28 20:20
本帖最後由 minimini 於 2009-6-28 20:32 編輯
you mean ball diff out of stock in kws
tekin708 發表於 2009-6-28 20:08


I said "Oh My God" because the Xray 008 ball diff worths $3xx..........so expensive for me........
作者: tekin708    時間: 2009-6-28 20:39
I said "Oh My God" because the Xray 008 ball diff worths $3xx..........so expensive for me........
minimini 發表於 2009-6-28 20:20

andy may give you discount around $29x-31x, is this expensive for you???
作者: LeoChan    時間: 2009-6-28 20:40
you mean ball diff out of stock in kws
tekin708 發表於 2009-6-28 20:08


instock !
作者: minimini    時間: 2009-6-28 20:42
andy may give you discount around $29x-31x, is this expensive for you???
tekin708 發表於 2009-6-28 20:39


I know this price is pretty good already...........but I need to double-check whether the original Atomic ball diff is ok or not.........
作者: tekin708    時間: 2009-6-28 20:45
I know this price is pretty good already...........but I need to double-check whether the original Atomic ball diff is ok or not.........
minimini 發表於 2009-6-28 20:42

ic ic.
作者: minimini    時間: 2009-6-29 01:56
本帖最後由 minimini 於 2009-6-29 01:57 編輯

師兄放心..............我今日去 "直篤" 買嘢..........同 Andy 閒聊...........順便話佢知呢單嘢...........佢就話 : "噢...........邊個咁唔好彩.........叫佢聽日攞番嚟換 !!"........
作者: Monsta    時間: 2009-6-29 02:04
之前睇相好想買,而家都係睇定 d先喇,無謂做白老鼠
作者: koji1230    時間: 2009-6-29 21:22
師兄放心..............我今日去 "直篤" 買嘢..........同 Andy 閒聊...........順便話佢知呢單嘢...........佢就話 : "噢...........邊個咁唔好彩.........叫佢聽日攞番嚟換 !!"........
minimini 發表於 2009-6-29 01:56

haha   ,thx minimini c hing
andy give me the right parts already
motor mount and ball diff.
作者: cf2468    時間: 2009-6-29 22:20
49# koji1230


c hing, 請問A210SS 質數好d定呢部好d,vm2相對好似無咁底買?
見到a210ss有埋shell and 呔,不過係唔係碳板呢? 我而家仲考慮僅呢兩部買邊部? (想玩快車的)
如果vm2設計上不是好a210ss太大佢離的話可能會買a210ss,好似低玩d.......
另想問問a210ss可唔可以頂到5.5t brashless motor?
現在等埋c hing 你的試車報告再作決定 thanks!
作者: AMAT    時間: 2009-6-29 22:23
QC of VM II.............
wrong motor mount
left  & right is different in manual,
but i have only 2 pcs of riht side .....
need to chage @ monday
any brother like me???
and the ball di ...
koji1230 發表於 2009-6-27 22:26


間唔中都會出現......
我買架YOKOMO B MAX4都俾錯C杯俾我......
作者: koji1230    時間: 2009-6-29 23:25
本帖最後由 koji1230 於 2009-7-7 23:44 編輯

50# cf2468
請問A210SS 質數好d定呢部好d(VM II better),vm2相對好似無咁底買? VM II more metal parts
見到a210ss有埋shell and 呔YES,不過係唔係碳板呢? No,210 FRP only我而家仲考慮僅呢兩部買邊部? (想玩快車的)
如果vm2設計上不是好a210ss太大佢離的話可能會買a210ssdesign VM II better,if u open gear box,u need not to open the upper deck plate,,好似低玩d.......
另想問問a210ss可唔可以頂到5.5t brashless motor?never test @ 5.5T
現在等埋c hing 你的試車報告再作決定 thanks!pls don't give me pressure
and VM II comes with 3 kind of 臂碼 to set different roll centre,and VM II have new design of 臂碼
作者: salim    時間: 2009-6-30 10:09
Waiting for test report...
作者: Evo5    時間: 2009-7-3 14:18
Xray  QC 都唔得啦!
少少問題,星期一就有得換,不知幾好.
環X 換,又話要影相,又話要點要點....
mschumi 發表於 2009-6-28 08:49 AM


你試下買隻有問题的好盈,睇下佢開唔開個盒換比妳?"
作者: powis    時間: 2009-7-3 18:00
你試下買隻有問题的好盈,睇下佢開唔開個盒換比妳?"
Evo5 發表於 2009-7-3 14:18


haha
作者: samuel20461    時間: 2009-7-3 20:32
54# Evo5


Ching you are RIGHT!




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) Powered by Discuz! X3.2